> 新闻中心 > 行业新闻
  • 壁挂式广告机怎么安装?
  • 本站编辑:杭州创众科技有限公司发布日期:2018-08-30 16:58 浏览次数:

2-1F424101235.jpg

 壁挂式广告机的安装步骤:
Installation procedure of wall mounted advertising machine:
1、 打开包装,取出广告机, 平放于桌面或者其它安全位置.;
1, open the packaging, take out the advertising machine, put it on the table or other safe place.
2、拿出钥匙, 打开广告机下面的挡板;
2, take out the key and open the baffle under the advertising machine.
3、用工具把打开的挡板下的螺丝拧下来,放 置于一边.,取下背面的壁挂;
3. Screw down the screws under the open baffle by means of tools and place them on one side. Remove the hanging wall on the back.
4、用电钻在墙面上打孔,打好后用螺丝刀把壁挂板固定于墙壁;
4. Drill holes on the wall with electric drill, then use the screwdriver to fix the wall hanging board on the wall.
5、将壁挂广告机固定在壁挂板上;
5. Fix the wall mounted advertising machine on the wall hanging board.
6、拧紧之前取下的挡板下的螺丝, 锁上挡板插上电源即可。
6. Tighten the screws under the baffle before tightening, lock the baffle and plug in the power supply.
安装时注意事项:
Points for attention during installation:
1、墙面:壁挂式安装对墙面牢固程度有较严格的要求,该考察场所墙壁的水泥结构是否牢固,是否安全。
1. Wall surface: wall hanging installation has stringent requirements on the firmness of the wall, the site to investigate whether the cement structure of the wall is firm, whether it is safe.
2、环境周围环境:安装环境一定不能潮湿,不宜长期放在潮湿的环境里,这样安装位置过于接近湿气会损坏广告机。
2. Environment around the environment: the installation environment must not be damp, not long-term in the humid environment, such installation location too close to humidity will damage the advertising machine.
3、避免强电磁场物体:尽量避免强电以及强电磁场物体的影响。
3, avoid strong electromagnetic field objects: try to avoid strong electricity and strong electric magnetic field objects.